What are common water testing parameters?

Common parameters of water testing depends on the purpose of assessment, the purpose can be variety like fitness as drinking water, agriculture use, wastewater treatment performance, discharge requirement as per the pollution control boards or regulatory bodies or national discharge standards, boiler water, cooling tower water, swimming pool, RO plant design, groundwater contamination assessment and many others.

What is the water testing required as per drinking water standards as per IS 10500:2012?

This Indian Standard (Second Revision) 10500 was adopted by the Bureau of Indian Standards, after the draft finalized by the Drinking Water Sectional Committee had been approved by the Food and Agriculture Division Council. The standard was first published in 1983. According to a report jointly prepared by the World Health Organization and the World Bank, approximately 1,230 million people lacked access to safe water supplies in 1975.

Comprehensive Workplace Environment Testing

Sep 12, 2025

SWA Environmental Private Limited (Consultants & Engineers) provides Comprehensive Workplace Testing – (Form 37 – As Per Factory Act 1948) in Gujarat.

Our registered office, manufacturing facility, and laboratory are based in Ahmedabad and Jaipur, India.

SWA Environmental Pvt. Ltd. is a recognized leader in environmental consulting and engineering services, specializing in:

• Wastewater Treatment
• Solid Waste Management
• Environmental Forensics
• Environmental Modeling

With NABL-accredited labs in Ahmedabad and Jaipur, SWA provides quality testing for industrial and occupational health compliance.

Form 37 – A Statutory Requirement Under the Factories Act, 1948

Under the Factories Act, 1948, Form 37 mandates that factories monitor and record workplace environmental conditions to safeguard worker health and well-being.
Scope of Compliance Includes:

• Air Quality Monitoring
• Noise Level Assessment
• Illumination Survey
• Thermal Comfort Evaluation
• Exposure to Hazardous Substances

Adhering to Form 37 ensures statutory compliance and contributes to a safer, healthier workplace.

Workplace Environmental Testing Services

SWA provides a full suite of environmental testing services in alignment with Form 37 compliance requirements:

1. Indoor Air Quality Monitoring
Ensuring safe air quality for occupational settings by measuring:
• Total Suspended Particulates (TSP)
• Particulate Matter (PM2.5 & PM10)
• Volatile Organic Compounds (VOC)
• Hazardous Gases (Benzene, Toluene, Xylene, etc.)
• General Gaseous Pollutants (CO, CO₂, SO₂, NOx)

2. Meteorological Parameter Assessment
Evaluating thermal comfort and ventilation effectiveness through:
• Ambient Temperature
• Relative Humidity
• Air Movement Surveys
• Air Changes per Hour (ACH) Analysis

3. Illumination (Lux Level) Survey
Comprehensive lighting assessment to support visual comfort and safety:
• Lux level measurement across workspaces
• Compliance with IS standards based on task type
• Recommendations for optimal lighting distribution

4. Occupational Noise Monitoring
Protecting against hearing damage and meeting regulatory noise limits:
• Ambient and operational noise level measurement
• Identification of noise hotspots
• Comparison with Permissible Exposure Limits (PELs)

5. Drinking Water Quality Testing
Ensuring availability of clean and safe drinking water by analyzing:
• Physico-chemical parameters (pH, TDS, hardness, etc.)
• Microbiological parameters (E. coli, total coliforms)
• Compliance with BIS 10500: Drinking Water Standards

Regulatory Compliance & Reporting

All tests and analyses are conducted in strict adherence to:
• CPCB (Central Pollution Control Board) Guidelines
• BIS (Bureau of Indian Standards)
• MoEF&CC (Ministry of Environment, Forest and Climate Change)
• OSHA (Occupational Safety and Health Administration, where applicable)
Comprehensive reports are generated in accordance with Form 37 requirements, including:
• Tabulated results
• Regulatory comparisons
• Recommendations for corrective actions
• Optional re-monitoring and periodic audits

Laboratory Capabilities

Our NABL-accredited laboratory is equipped to perform:
• Water and wastewater quality testing (100+ parameters)
• Ambient air and stack emission analysis
• Soil and sludge evaluation
• Indoor air quality assessments
• Noise monitoring services
Certified by GPCB and MoEF&CC, we ensure accurate, reliable environmental data through approved testing methods and standards.

Why Choose SWA Environmental?

• Technical Expertise: Experienced professionals in environmental engineering and regulatory compliance
• Quality Assurance: NABL-accredited lab ensuring data integrity
• End-to-End Services: Single-window solution for all environmental monitoring needs
• Client-Focused Approach: Tailored solutions to meet unique client requirements
• Timely Delivery: Fast turnaround time for reporting and compliance documentation

Service Locations in Gujarat

SWA Environmental provides Form 37 Workplace Testing Services across Gujarat, including but not limited to: Ahmedabad, Surat, Vadodara, Rajkot, Bhavnagar, Jamnagar, Anand, Gandhinagar, Bharuch, Morbi, Vapi, Valsad, Junagadh, Nadiad, Mehsana, Porbandar, Godhra, Navsari, Surendranagar, Patan, Amreli, Palanpur, Modasa, Dahod, Gandhidham, Bhuj, Ankleshwar, Kalol, Sanand, Halol, Kadi, Khambhat, Jetpur, Kutch, Mundra, Rajpipla, Dwarka, Dholka, Gandharpur, Bhachau, Chotila, Dhandhuka, Umargam, Padra, Jhagadia, Savli, Sachin, Palghar, Vallabh Vidyanagar, Mandvi, Halvad, Balasinor, Nandesari, Pardi, Karamsad.

Connect With Us

To schedule a workplace environmental testing service or for more information, visit:

Website: www.swaenviro.com
Phone No: +91 8828186901
Email Id: swa@swaenviro.com

View Product: Click here